Kitchens
Splashbacks & cooktop glass
Back-painted toughened glass that turns the wall behind the hob into one seamless, heat-safe, wipe-clean surface.
The surface
One clean sheet of glass, wall to wall.
Reference photography shown. Images of ASTRAA’s own finished installations replace these before launch.
Overview
Why back-painted glass belongs behind the hob.
A splashback is toughened glass with colour lacquered onto its reverse face, then fired and sealed. The glass sits between the heat of a gas flame or induction ring and the wall behind it, taking the temperature without crazing, discolouring or lifting.
Because it goes up as one panel, there are no grout lines to trap grease and no seams to scrub — grease and splatter wipe away with a cloth. The colour is chosen from any RAL shade, so the splashback can disappear into the cabinetry or stand as the brightest surface in the room.
Every panel is measured on site, cut to the millimetre and drilled for the exact sockets, switches and fittings your kitchen needs — then delivered and installed by our own team.
Features
What every splashback gives you.
- Toughened to IS 2553
- Any RAL colour
- Heat-safe behind gas & induction
- Custom cut-outs for sockets
- Seamless — no grout lines to trap grease
- Wipe-clean, non-porous surface
- Flat, pencil, bevel or mitre edges
- Fitted by our own installation team
Finishes
Four ways to finish the same panel.
The glass is the same toughened sheet each time — the finish is what changes the room.
Back-painted
Colour lacquer sprayed and cured on the reverse face, then sealed behind toughened glass. The result is a deep, even, glossy field of colour in any RAL shade — the workhorse finish for splashbacks behind a hob.
Printed
Ceramic or digital printing lays down pattern, texture or a full graphic before toughening, so the image is fired into the surface and will not fade, peel or scratch off. Ideal for feature walls and branded panels.
Metallic
A metallic pigment layer gives the glass the sheen of brushed steel, bronze or champagne while keeping every splashback virtue — heat-safe, seamless and wipe-clean. A quieter alternative to a full mirror.
Mirror
Toughened safety mirror opens up compact kitchens and bounces light across an island. Available clear, bronze or grey-tinted, with the same custom cut-outs and edgework as any other panel.
Specifications
The numbers behind the panel.
Representative values — final specification is confirmed against your drawing and site measurement.
| Specification | Value |
|---|---|
| Max panel size | 2400 × 1200 mm |
| Thicknesses | 6 / 8 / 10 / 12 mm |
| Toughening | IS 2553 / EN 12150 |
| Edgework | Flat, pencil, bevel, mitre |
| Finishes | Back-painted, printed, metallic, mirror |
| Cut-outs | Sockets, switches, fittings |
More for the kitchen
The rest of the kitchen range.
Cabinet & shutter fronts
Lacquered glass fronts that give modular cabinetry a deep, uniform, fingerprint-resistant finish.
Countertops & breakfast bars
Toughened glass work surfaces and bar tops — hygienic, non-porous and available in bespoke sizes.
Shelving, racks & fronts
Load-rated glass shelving with matched stainless fittings for open kitchens and pantries.
Feature panels & lit niches
Printed and back-lit glass panels for niches, islands and feature walls — texture and light on demand.
Have a wall and a colour in mind?
Send the size and a RAL reference, or just a photo of the space. We’ll measure, advise on the finish, and come back with a fixed quote.
- Site measurement
- Any RAL colour
- Fixed pricing